Search
- Filter Results
- Location
- Classification
- Include attachments
- https://producthelp.amana.com/Cooking/Cooktops/Gas_Cooktop/Operation/Lighting_the_Burners_-_Electronic_IgnitionWhen the cooktop control knob is pushed in and turned to Ignite, the system creates a spark to light the burner. When the cooktop control knob is turned to the “Ignite” position, a spark is used to li...When the cooktop control knob is pushed in and turned to Ignite, the system creates a spark to light the burner. When the cooktop control knob is turned to the “Ignite” position, a spark is used to light the burner, this sparking will continue between the “Ignite” and “Hi” positions. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section in the Owner’s Manual.
- https://producthelp.amana.com/Cooking/Microwaves/Product_Info/Microwave_Product_Information/How_to_Improve_Popcorn_PerformanceImprove microwave popcorn: Use fresh bags, stop when the popping slows to 1 pop every 1-2 seconds. Results vary by brand/fat content. Follow the manufacturer's and microwave's instructions. Avoid pape...Improve microwave popcorn: Use fresh bags, stop when the popping slows to 1 pop every 1-2 seconds. Results vary by brand/fat content. Follow the manufacturer's and microwave's instructions. Avoid paper bags/glassware. Attend to the microwave at all times.
- https://producthelp.amana.com/Refrigeration/Freezers/Product_Info/Product_Assistance/Using_the_Alarm_FeatureThe temperature alarm in your freezer alerts you if the temperature rises above normal. To change the settings: test the alarm by pressing right, turn it on by pressing left, or turn it off by moving ...The temperature alarm in your freezer alerts you if the temperature rises above normal. To change the settings: test the alarm by pressing right, turn it on by pressing left, or turn it off by moving to the center.
- https://producthelp.amana.com/Refrigeration/Freezers/Product_Info/Product_Assistance/How_Adding_a_Large_Amount_of_Food_Can_Impact_TemperatureAdding a large amount of food to your freezer can temporarily warm it up, and it may take several hours for the temperature to stabilize. Before the first use, allow the freezer to cool for 6 to 8 hou...Adding a large amount of food to your freezer can temporarily warm it up, and it may take several hours for the temperature to stabilize. Before the first use, allow the freezer to cool for 6 to 8 hours. Additionally, let the freezer cool overnight before adding large amounts of unfrozen food. It's advised not to add more than 2 to 3 pounds of unfrozen food per cubic foot of freezer space.
- https://producthelp.amana.com/Refrigeration/Freezers/Product_Info/Product_Assistance/Setting_the_Controls_for_a_FreezerTo properly set the controls in your chest freezer, ensure it's turned on after a power outage. The mid-setting is suitable for normal use, maintaining the temperature at or near 0°F (-17.8°C). Wait 2...To properly set the controls in your chest freezer, ensure it's turned on after a power outage. The mid-setting is suitable for normal use, maintaining the temperature at or near 0°F (-17.8°C). Wait 24 hours between adjustments. Adjust to a higher setting for colder temperatures and allow 6-8 hours for cooling before adding frozen food. Never exceed two to three pounds of unfrozen food per cubic foot of freezer space.
- https://producthelp.amana.com/Refrigeration/Full-Size_Refrigerators/Product_Info/Tips_and_Tricks/How_to_Calibrate_the_Measured_Fill_FeatureTo calibrate the Measured Fill feature on your refrigerator, ensure household water pressure is stable. Perform calibration when water usage is low and after flushing the water system. Place a measuri...To calibrate the Measured Fill feature on your refrigerator, ensure household water pressure is stable. Perform calibration when water usage is low and after flushing the water system. Place a measuring cup on the dispenser tray and hold the MEASURED FILL button for 3 seconds. The Calibration and Measured Fill icons will illuminate. Hold the water dispenser paddle until 1 cup of water fills the measuring cup. Confirm calibration by touching the center of the ring button.
- https://producthelp.amana.com/Laundry/Dryers/Product_Info/Dryer_Cleaning_and_Care/Cleaning_the_Cooling_Fan_on_a_HybridCare_Electric_DryerClean the HybridCare™ dryer cooling fan monthly. Pull the dryer out and vacuum the screen on the back lower right to maintain optimal performance.
- https://producthelp.amana.com/Refrigeration/Full-Size_Refrigerators/Product_Info/Tips_and_Tricks/Preventing_Frost_or_Ice_Crystals_on_FoodTo prevent frost or ice crystals on food in your freezer, use freezer-safe containers and moisture-proof wrap. Avoid overloading the freezer and minimize door openings. Ensure the door seals properly ...To prevent frost or ice crystals on food in your freezer, use freezer-safe containers and moisture-proof wrap. Avoid overloading the freezer and minimize door openings. Ensure the door seals properly and check for obstructions. Monitor humidity levels, especially in non-air-conditioned environments, and adjust temperature controls if needed.
- https://producthelp.amana.com/Refrigeration/Full-Size_Refrigerators/Product_Info/Installation_Support/How_to_Remove_or_Reset_the_Door_Hinge_-_Soft_Closure_FeatureTo reset the bottom door hinge on a refrigerator: Lift door, remove hinge, insert into door slot, align parallel, turn to 90°, reattach hinge to cabinet. Ensure a 90° angle for proper operation.
- https://producthelp.amana.com/Cooking/Microwaves/Product_Info/Microwave_Product_Information/Changing_the_Power_Level_on_an_Over_the_Range_MicrowaveTo change the power level on a microwave: Open the door, place food on the turntable, press POWER, select cook power percentage, press POWER again, enter cook time, close the door, and press START.
- https://producthelp.amana.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Checking_the_Fill_Hoses_if_the_Washer_is_not_FillingEnsure your Washer fills correctly: 1. Check household faucets and confirm both hot and cold water supply lines are on. 2. Inspect inlet hoses for kinks. 3. Verify drain hose installation, avoiding si...Ensure your Washer fills correctly: 1. Check household faucets and confirm both hot and cold water supply lines are on. 2. Inspect inlet hoses for kinks. 3. Verify drain hose installation, avoiding siphoning.