Clothing Wet at End of Cycle - Dryer
Possible Solutions
Is the Lint Screen clean?
The lint screen will be located in the door opening of the dryer. A screen blocked by lint can increase drying time. It is imperative to clean your lint screen after every use.
Is there an AF Error Code or Check Vent Light on?
A clogged exhaust vent system slows moist air from leaving the dryer and extends drying time. Run the dryer for 5-10 minutes. Hold your hand under the outside exhaust hood to check the air movement. If the air movement is less than a hair dryer on high speed, clean the lint from the entire length of the system and the exhaust hood.
Does the home venting line need to be cleaned or tested?
If a dryer is heating but still has long dry times, the likely cause is a vent issue or restricted airflow. The venting going from the dryer to the outside of the home must be cleaned every one to two years or as needed when dry performance has decreased. You can also contact a professional vent cleaning service and have your vent inspected for obstructions.
Regular dryer vent cleaning will:
- Reduce Drying Time
- Increase Air Flow
- Reduce Energy Cost
Dryer Vent Testing Kit
At Amana, we understand the importance of keeping your home safe and your appliances running efficiently. That's why we offer a convenient and reliable option for ordering a dryer vent testing kit directly from our website, Amana.com. Our dryer vent testing kits are designed to help you easily assess the performance of your dryer vent system, ensuring optimal airflow and reducing the risk of fire hazards.
A dryer vent testing kit, part #W11224254 Contact Us to order a Dryer Vent Test Kit.
Replacement parts can be purchased at Amana Purchase Genuine Parts.
What cycle was selected?
Cycle selection is important. If the clothes don't reach the desired dryness level, try selecting a different cycle, such as "More Dry" or "Regular."
Quick Dry and Rapid Dry are timed cycles designed to dry smaller loads. If clothes are too wet after the cycle has been completed, try running the Quick Dry or Rapid Dry cycle again. For best performance, use an automatic cycle.
Was a Steam Cycle selected?
Steam cycles are optimized for large, normal, or heavy loads. Using this feature with smaller loads could result in wet spots or condensation on the door or interior drum. The dryer will automatically tumble, pause, and introduce a small amount of moisture into the load to help reduce static and relax wrinkles. This option adds approximately 3-8 minutes to the total cycle time.
It is recommended to use this cycle, with wrinkle-free cotton, cotton-polyester blends, common knits, and synthetics, as it is best for smoothing out wrinkles and reducing odors from dry loads. Refer to garment care label instructions. Dry-clean-only garments are not recommended.
Refer to How the Steam Option Works for more information
Is the dryer level?
If the dryer is not level, clothes may not come into contact with the moisture sensors during Automatic cycles. See your Owner's Manual for leveling instructions. Learn how to use your phone to level household appliances.
Have you tried changing your Factory Dryness Level?
You can make adjustments to your Automatic Cycles by adjusting the Factory Dryness Level: If all your loads on all Automatic Cycles are consistently less dry or drier than you would like, you may change the default settings to increase or decrease the default dryness level. Refer to your Owner's Manual for information on your model number.
Still need help? Contact us or schedule service.
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
United States
Canada
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
United States
Canada