Replacing the Cooktop Light on an Over the Range Microwave
Replacing the Cooktop Light Bulb on a Amana Low Profile Over the Range Microwave
Your cooktop light should come on when it is selected or when the button is pushed. If the display is on and the microwave is operating, and the light bulb doesn't come on, it might need to be replaced. Learn how to safely replace the under-cabinet cooktop light bulb on your Amana over-the-range microwave, including required bulb specifications, step-by-step installation, and important safety guidelines.
Replacement parts can be purchased at Amana Purchase Genuine Parts.
Step-by-Step Cooktop Light Replacement
NOTE: There may be one (1) or two (2) bulbs depending on model.
- Unplug or disconnect the power from the microwave.
- Locate the cooktop/vent light bulb, which is located on the underside of the microwave oven.
- Remove the bulb cover screw, and open the bulb cover.
- Remove the bulb.
- Replace the bulb with an incandescent bulb, close the bulb cover, and secure it with a screw.
IMPORTANT: Use only an incandescent light bulb as a replacement. Do not use an LED light bulb.
What to Do If the New Light Still Won't Turn On
If your new light bulb fails to illuminate after installation:
- Check Socket Seating: Ensure the bulb is screwed completely into the socket.
- Test Control Panel Settings: Press the surface light button multiple times to toggle through high, low, and off settings.
- Inspect Home Circuit Breaker: Verify the circuit breaker did not trip during power restoration.