Is the Lint Screen Clean?
The lint screen will be located in the door opening of the dryer. A screen blocked by lint can increase drying time. It is extremely important to clean your lint screen after every use.
CLICK HERE for more information on cleaning the lint screen.
Is the exhaust vent or outside exhaust hood clogged with lint and restricting air movement?
A clogged exhaust vent system slows moist air from leaving the dryer and extends drying time. Run the dryer for 5-10 minutes. Hold your hand under the outside exhaust hood to check air movement. If the air movement is less than a hair dryer on high speed, clean the lint from the entire length of the system and the exhaust hood.
CLICK HERE for more information on cleaning the exhaust vent or outside exhaust hood.
Drying a Large Load?
Large loads take longer to dry. A load that is too large for the dryer will not tumble and limits air movement in the dryer. This slows the process of removing moist air out of the dryer, which will result in longer drying cycles.
Difference between Auto Dry and Timed Dry:
During Automatic Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. Use the NORMAL dryness level to provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
Still need help?
Please contact us at 1-866-616-2664, or by live chat, email or mail.