Skip to main content
Amana Appliances

Long Cycle Time

 

Possible Solutions

Is the dishwasher running too long?

Cycle time is anywhere from 1.5 to 4 hours long depending on the cycle and options selected. Some models are equipped with an optical sensor wash that detects water temperature, soil and detergent amount. Wash cycles are then adjusted based on what is sensed. When loads are overly dirty, the optical sensor will default to the longest cycle time available. A delay automatically occurs in some wash and rinse cycles until the water reaches the proper temperature.

CLICK HERE for more information on how the sensor works and how to clean the sensor.

Is the water temperature correct?

As part of normal operation, the dishwasher pauses two to three times during the cycle for thermal holds and advances once the temperature is met. When certain cycles and/or options are selected, a longer cycle is normal. Additional time is needed to heat the water to the proper temperature for cleaning and/or sanitizing your dishes. Before starting a load, run the hot water faucet nearest the sink until the water is hot; then turn off the faucet and start the dishwasher.

CLICK HERE for more information on dishwasher water temperature.

Still need help?

Please contact us at 1-866-616-2664, or by live chat, email or mail.


  • Was this article helpful?